Viewing Mifare 1K/4K Memory in Skyeware V4 Documentation Category

This page contains documentation, downloads, firmware, and support materials for this product or topic.

Choose a different product/topic

More Info

The Mifare 1k/4k Memory demonstration lets you enter authentication keys to read and write blocks of memory.  You can enter a Read key and a Write key. 

  • Keys that are entered are used for the currently selected block only.
  • Keys that are set in the Mifare 1k/4k configuration screen are used for all other blocks.

To enter a key:

  1. Hold a tag in the detection field.
  2. Select the tag from the tag list.
  3. Click on the “Read” button to read the currently selected block.
  4. For the read or write password, select the Key Type (A or B) from the pull-down list.
  5. Enter the key data in hexadecimal format.
  6. Click “Write” to write the new data values to the currently selected block.
  7. (Optional) Click “Load” to read memory contents from a file.
  8. (Optional) Click “Save” to save the memory contents to a file.

← Return to Documentation Search